- Luxury Vinyl Flooring
- Naturelle Vinyl Flooring
- London Granite - Luxury Vinyl Floor Tile
London Granite - Luxury Vinyl Floor Tile
Click on thumbnail to view.
 |
 |
Luxury Vinyl Tile flooring is an ideal product for any room in the home or in a commercial environment, as it is warm and quiet underfoot, extremely hardwearing, realistic, versatile and easy to maintain to name but a few benefits. As one of the UK's largest suppliers of luxury vinyl flooring we can offer 1000's of choices at the lowest prices.
This product is sold per box 4.05m2
£10.49m2 x 4.05m2 (box quantity) = £42.50 including VAT and FREE Delivery
This product is IN STOCK
 |
|
Enter the total area you require:
m2
Including VAT and FREE delivery |
 |
Tile Size: 450mm x 450mm (18" x 18")
Tile Thickness: 2.5mm
Product Wear Layer: 0.7mm
Box Quantity: 20 tiles (4.05m2)
Bevelled edge: yes
Backing: dry back (adhesive required)
Installation Method: fully stuck
Notes: 2mm thickness design strips should be used in between these tiles as the tile bevels down to 2mm
Luxury vinyl tile flooring is recommended to be installed by a qualified installer, however for basic installation information read below:
Solid Subfloor i.e Concrete, Asphalt
firstly you will need to identify if there is any moisture in the concrete, if there is a recommended DPM (damp proof membrane) will be required, unless you let the concrete dry out naturally over time. If there is no damp, the floor will usually require a Primer, followed by a recommended floor layers self levelling compound (screed), once this has dried, then a recommended luxury vinyl flooring adhesive should be applied to the self levelling compound and the tiles placed into the "tacky" adhesive and then rolled to ensure maximum contact with the adhesive.
Wooden Subfloor i.e floorboards, chipboard
For wooden subfloors, the general installation procedure is firstly fix plyboard (minimum thickness 6mm) to the subfloor using nails or screws ensuring they are countersunk into the plyboard and that the sheets of plyboard are butted up as closely together as possible. Then a skim coat, also known as a feather finish is required to be spread across the joints of the ply and also across the screw / nail holes, to create an even smooth floor. Once this has dried (usually within 30 minutes) then a recommended luxury vinyl flooring adhesive should be applied to the plyboard and the tiles placed into the "tacky" adhesive and then rolled to ensure maximum contact with the adhesive.
These installation instructions are used as a guide, we recommend consulting with a professional first if you intend to install it yourself. We supply all materials required to install this flooring, except plyboard, which can be purchased from most timber merchants.
For more advice search for luxury vinyl flooring installation on YouTube or call us on 01704 536404 and ask for technical.
